Brass Multi Color Nozzle 3 IN 1 OUT Extruder 0.4mm For 1.75mm Filament Multi Nozzle for KOSSEL and Prusa I3 for selction
Brand Name: BIQU
Model Number: 3D0084/3D0160
Place of Origin: Guangdong, China (Mainland)
Product name: Lite6 3 IN 1 OUT Extruder
Net weight: 280g
Filament Size: 1.75mm
Nozzle Size: 0.4mm
Packing: Foam + carton box
If there is a display controller on your printer:
Carefully pry open the EXP2 IDC plug using an X-acto knife, an awl or other sharp/pointy instrument (or just cut it off and buy a new 2x5 pin IDC connector)
Dismount the wire on pin 8 (when counted from the corner with the triangle symbol) from the IDC plug and reassemble the rest of the plug.
Make (solder) an adapter board that can convert 5 volt from the ICSP header into 3,3 volt for the SD-card reader. Then connect the output to the dismounted wire from EXP2 pin 8.